Oxydmetall
Item no. 1351
Oxydmetall lets trowelled surfaces oxidise afterwards. Copper gives the copper look, iron the rust look. Per variant, you get the binder in a 500-ml container with the matching copper or iron powder, and you mix the two before application. Allow approx. 250 to 300 ml per m² for both variants. We do not prescribe a fixed number of coats. You control how quickly the surface oxidises with Metall Aktiv. The acid-containing activator is available as a separate product in a 500-ml container with a spray head.
- Two-part: 500 ml container plus matching copper or iron powder
- Consumption: approx. 250 to 300 ml per m²
- Faster oxidation: with Metall Aktiv, acid-containing, as a separate item in a 500 ml spray container
Choose Metal
Price after account approval
Materea supplies applicators. With a valid VAT ID your account is approved immediately and you see all prices.
Register as a businessAlready approved? Log in
Oxydmetall
Price after account approval
The system build-up
Oxydmetall is layer four. You need the rest to go with it.
A surface lasts because the layers fit together. Everything here is matched to Oxydmetall and comes in one order.
The build-up for this surface
Technical data & downloads
The figures for application.
All values come from our catalogue.
Application
Values and conditions
- VariantsCopper (copper look) and iron (rust look)
- Consumptionapprox. 250 to 300 ml per m²
- AccessoriesMetall Aktiv speeds up oxidation as an acidic activator, 500 ml container with spray head, consumption approx. 150 to 250 ml per m²
Preparation
- Supplied as500 ml container plus matching copper or iron powder
Consumption and timing values depend on the substrate and the room climate. The values come from our catalogue.
Questions
What applicators ask about this.
Frequently asked questions
Copper or iron, what is the difference?
The look. Oxydmetall copper produces a copper look, Oxydmetall iron a rust look. The container is the same for both: 500 ml with the matching copper or iron powder respectively.
How much do I need per square metre?
Approx. 250 to 300 ml per m², for copper and iron alike. We do not prescribe the number of coats.
Can I speed up the oxidation?
Yes, Metall Aktiv speeds it up. You spray the acid-containing activator on from the 500-ml container with a spray head; consumption is approx. 150 to 250 ml per m².
What the surface still needs.
Primer and sealer are part of the build-up. The times given above apply to the fully sealed surface.
