Naturale powder
15 kg
Item no. 1005
You decide whether the decorative wall surface turns out textured or smooth when you trowel it off. You apply Naturale powder at medium layer thickness. The lime-marble-based dry mortar is mineral, vapour-permeable and moisture-regulating. The shade comes from the powder pigments, in 32 Materea tints. There are also six mica additives in 0.2-kg containers: Gold Piece 3, Silver Piece 3, Silver Piece 7, Dark Piece 10, Dark Piece 30 and Cats Grain. You refine the finished surface with the D-Kortih glazes and protect it with the impregnating soap.
- Lime marble base: medium-layer dry mortar for decorative wall surfaces
- Tinted with dry pigment, no tinting surcharge: one pack of pigment per 15 kg sack
- 32 Materea tints: via the matching powder pigments
- Can be enhanced: with D-Kortih glazes, impregnating soap as protection
Price after account approval
Materea supplies applicators. With a valid VAT ID your account is approved immediately and you see all prices.
Coverage: approx. 7.5 m² with one coat, depending on the substrate
Register as a businessAlready approved? Log in
Naturale powder
Price after account approval
Quantity calculator
From the area to the container.
Enter the area, read off the container combination. We calculate with the value from our catalogue: 2.0 kg per m² and coat, one coat.
Technical data & downloads
The figures for application.
All values come from our catalogue.
Application
Values and conditions
- Consumptionapprox. 2.0 kg per m² and coat
- BaseDry mortar based on lime marble
- Usedecorative design of walls, applied textured or smooth depending on application
- Diffusionvapour-permeable and moisture-regulating
- Shade32 Materea tints, coloured with the powder pigments
- FinishingD-Kortih glazes for finishing, impregnating soap for protection
- AdditivesMica additives available (Gold Piece 3, Silver Piece 3, Silver Piece 7, Dark Piece 10, Dark Piece 30, Cats Grain, 0.2 kg each)
Consumption and timing values depend on the substrate and the room climate. The values come from our catalogue.
Questions
What applicators ask about this.
Frequently asked questions
How does the shade get into the powder?
Through the matching powder pigments, which are the 32 Materea tints. You do not need the tinting surcharge here; it applies to T-Razzino and Naturale fine, medium and coarse.
How much material do I need per square metre?
Allow for 1.2 to 2 kg per m². We do not prescribe a fixed number of coats; the amount you need depends on the layer thickness.
Will the surface be textured or smooth?
Both are possible. You decide that when you trowel it off. Apply the material at medium layer thickness.
What do I use to finish and protect the completed surface?
Refine with the D-Kortih glazes, protect with the impregnating soap. Both are our own products.
Can I incorporate mica into the surface?
Yes. Six mica additives are intended for Naturale powder: Gold Piece 3, Silver Piece 3, Silver Piece 7, Dark Piece 10, Dark Piece 30 and Cats Grain, each in a 0.2-kg container. You will find them in the shop as variants of the D-Kortih effect pigments.
Finished surfaces
This is what the surface looks like
when it is finished.
Bathrooms, showers, floors and walls without a single joint, made with this material.
Goes with your order.
From the same area of the range.
